Part No: 432-247
TMS Mini Sample Vice & 3-Pt Bend
The TMS Mini Sample Vice, from FTC, is an excellent fixture for performing puncture, penetration and breaking tests on smaller samples, for example three-point bend tests on tablets.
The fixture consists of two vice jaws fitted to a base plate that can be adjusted, both horizontally and vertically, to firmly grip the sides of regular shaped samples between 1mm and 40mm in width. The fine precision alignment provided by this movement enables consistent set-up of test measurements and much greater accuracy in results.
"V" slots in the jaws accommodate table type products and prevent movement during puncture and penetration tests.
The mini sample vice is supplied, as standard, with a perspex knife edge to enable three-point bend testing.
Contents and Summary
- Adjustable support plate with 2 x “T” bolt fixings
- Top blade with 3mm diameter test surface
- 6mm top thread and locking nuts fits:
- This fixture is only recommended for texture measurement applications below 250N.
-standard load cells via 10/32 to M6 thread adapter
-heavy-duty load cells via relevant M6 thread adapter supplied with load cell
Must be used in conjunction with:
-TMS extension piece set (432-100)
Applications
- Crispness of vegetable crudités
- Crispness in staling of potato chips
- Brittleness and hardness of hard baked biscuits
- Flexure and softness of American style cookies
- Snap force of tablets
- Break strength of tortilla shells
